 |
Custom phone：010-82539784
Price：电话咨询
Hits：132
|
Description
[ product introduction ] the Gateway System Adopts Network TCP / Ip Networking, each gateway controller has its own network interface, and can access the network independently to realize the whole system networking function. Each controller can control the two-way card opening of a channel gate machine, which can restrict the entrance and exit of people or motorcycles and bicycles to enter the designated gate point only within a specified time. In other cases, all personnel are forbidden to go in and out. After the occurrence of an alarm event, the on-site alarm (optional) can be activated or the information can be transmitted to the management center through the network, management Center electronic map automatically pop-up alarm point and through sound and light alarm to notify the relevant management personnel to deal with in a timely manner, with anti-relocation, regional, multi-group, deployment / withdrawal of anti-special features. Size: 1200mm * 300mm * 980mm shell material: 2mm thick 304 stainless steel wire drawing plate + plastic door material: Acrylic Wing; available in red, blue, transparent weight: about 120Kg Channel Width: 550mm (standard) power supply: 220VAC 20% , 50Hz power consumption: about 120W when working, about 60W when standby. Ambient temperature:-40 °C ~ 50 °C relative humidity: 20% ~ 95% (non-dew) human detection: 8 Pairs of Infrared Ray tube information prompt: traffic indicator, voice prompt interface mode: TCP / Ip (Standard) , switch volume support card reader: two-dimensional Bar Code, RFID card, the second generation ID card, face recognition and other maximum throughput speed: about 40-45 person / minute / Channel Mechanical Rotary Life: More than 5 million times (functional characteristics)1, streamlined design, all Stainless Steel Shell; 2, Flexible Door Sheet Material, avoid injury; 3, DC brushless motor and international well-known deceleration mechanism, ensure the movement of long life, low noise; 4, the machine standard: stainless steel shell (including plastic parts) , door mechanism, door mechanism controller, main controller, 5-inch color screen display, strip light board indication, human detection photoelectric sensor, traffic lights, voice module, Power Module; 5, Bar Code card reader window uses wear-resistant Quartz Glass; 6, through the setting switch can be set to normally open, normally closed two working modes; 7, Safety Measures: In order to prevent the brake machine hurt people, a multi-point infrared sensor is installed in the active area of the door page. The door page automatically stops rotating when a person is detected in the rotating area. The door page does not close until it leaves the area. Even if the door page touches the customer in the process of turning, the two design ideas ensure that the gate machine will not clip the customer, the door page uses flexible materials, with a certain space to avoid, when the extrusion pressure exceeds the safety value, the door page will automatically open; 8, in case of emergency, can be linked with the fire, the door automatically open, the channel in open mode; 9, power failure, the door automatically open; 10, to support the countdown function; 11, Ticket Verification, Voice Broadcast Results; 12, support a variety of card reader: two-dimensional Bar Code, RFID card reader, second-generation card reader, face recognition; 13, support two-way Verification Access; 14, integrated motherboard, the main board with access control function 15, can add lightning protection, heating dehumidification device, adapt to different temperature and humidity environment.
